MTD 14BI845H129 Operator's Manual page 14

screw which secures the mounting clamp. See
Figure 19. Slip the end of the drain tube into the
mounting clamp. Tighten the self-tapping screw to
secure the clamp. Do not overtighten which could
collapse the drain tube.
NOTE: The vented battery allows any gases or liquid
from the battery to be drained onto the ground.
• Trim end of drain tube if more than 1 inch extends
below the frame.
FinalAssembly
• Make certain all nuts and bolts are tightened
securely.
/ SelfiTapping _ Mounting
Screw Clamp
Figure 19
14