Table of Contents
Advertisement
6. Followstepsbelowto assemblethe grasscatcher:
a. Placebag overframe sothat its black plasticside
is at the bottom.
b. Slip plasticchannelof grass bagoverhooks on
the frame.See Figure3-6. All the plasticchannels
exceptcentertop of bag attachfrom outsideof
bag.
c. Attachcentertop of bag from insideof bag.
7. Followstepsbelowto attachgrass catcher:
a. Lift rear dischargedoor.
b. Placegrass catcheron thepivot rod. Letgo
of dischargedoor sothat it restson thegrass
catcher.See Figure3-7.
To removegrass catcheror convertto a mulcher(if
equipped),lift rear dischargedoor on the moweras
shown in Figure3-7.Liftgrass catcherup and out of the
pivot rod. Releasereardischargedoor to allowit to close
rearopeningof mower.
8. The adjustment w heelis locatedin the drivecontrol
handle housingand is usedto tightenor loosenthe
drive belt.You will needto adjust thedrivecontrol if
the mowerdoesnot propelitselfwith thedrive control
engagedor if the mower'swheelshesitatewith the
drivecontrolengaged.If eitherof these conditions
occur,rotateadjustmentwheelclockwiseto tighten
cable or counterclockwise to loosenthe cable. See
Figure3-8.
,L_hlL
WARNING: Never operate mower
unless the hooks on the grass
catcher are firmly seated on the
pivot rod, and the rear discharge door rests
firmly against top of the grass catcher.
Figure 3=5
J
Figure 3-6
\
Y
J
Figure 3-8
Figure 3-7
7
setupand
cuTnNG
HEIGHT
All Wheelsmust be
plaCed in the same
relative positionl
GRASS CATCHER
Makecertain bag is
turned right side out
before assembling
(warning label Willbe
on the outside)i
Never operate mower
the hooks on
the grass catcher are
firmly seated on the
pivot rod, and the
rear discharge door
rests firmly against
top of the grass
Catcherl
Advertisement
Table of Contents
