Mitsubishi VS-50803 Owner's Manual page 42

Creating the AN Connection (Home Theater) (cont.)
External Audio System
The external audio s_*tem selection allows you _o turn offthe speakers in the
TV when you have connected _he TV to a Home Theater Receiver, Audio
Receiver or o_her stereo system. This will prevent potential mismatches
between the TV speaker volume. To use "Volume Controlled by AV Received'
or "AV Receiver a_ Inpu_ 1" se_ to YES.
[:::*Important: If you changed _he _Ex_ernal Audio System" setting from YES _o
NO _he speakers in _he TV will be turned on again. To prevent
damaging the TV speakers and _o prevent a sudden increase of
volume, make sure you have _urned down the TWs volume first.
AV Receiver at Input 1
To make this selection, the "External Audio System" must be set _o YES.
Vvqaen an AV receiver is connected, _o ensure _he best possible picture, always
selec_ YES.
Volume Controlled by AV Receiver
To make this selection, the "External Audio System" must be set _o YES.
Some Home Theater Receivers, Audio Receivers and s_ereo systems use a
remo_e control for volume se_tSng. If your receiver or stereo s_*tem has this
functSon, set _he %rolume Change By AV ReceiveF' to YES. If your system
does not use a remote control to adjust _he volume se_tings, then set _he
%rolume Change By AV ReceiveF' _o NO.
40 Chapter 2: Operating Your TV