Table of Contents
Advertisement
Creating
the AN
Connection
(Home
Theater)
(cont.)
using
the PLAY key on the remote
control:
•
Active AiV Network will turn yo_r VCR on and play a tape (if may).
•
Active A/V Network
will turn your TV on and switch
it to IN-
PUT-1.
•
When you turn your TV off. your VCR wiE turn
off. m,z!_
it is
playing
or recording.
displaying
the VCR menu
When you set the remote
to VCR and then press MENU:
•
Active A]V Network
will turn on your VCI_ if it is off and display
the VCI_'s menu (this function
may not work with some older
Mitsubishi
VCI_'s).
•
Active A/V Network
will turn
on your TV if it is off and switch
it
to INPUT-1.
I:> Important:
If the TV is not receiving
a signal
on LNPUT-1, it will automaticaEy
turn offin two minutes.
If you use a TV menu during
this tSme,
the TV will turn offin
five minutes
after you stop using the menus.
I_> I mportant:
If you de not use the AA r Network
system,
set "AiV Network"
to
_Off". If you don't, channel
selection
may not work correctly.
The
A_ r Network
can still be used to pass remote
control
signals
even
when the TV's, _A_ r Network"
setting
is "Off".
When the AiV Network
is set to "ACTIVE',
selecting
an input
choice (Input
1, 2 or 3) that is either
offer not connected
will cause
the TV to automatically
turn off within
two minutes.
Getting
Started
39
Advertisement
Table of Contents
