Mitsubishi CS-27309 Owner's Manual page 41

Using the remote control to operate VCRs, cable
boxes and other components (cont.)
_Important:
Important:
notes about your remote control
Sometimes manufacturers will: change their products, or t]_ey may
use more than one code. If this is the case, your remote may not be
able to operate your VCR or cable box.
When you replace the batteries in your remote control, the remote
will usually return to its initial setting. You may need to set up
your remote again.
using your remote to operate your Mitsubishi laserdisc
player
After you have set up your remote control for your laserdisc or DVD
player, you can use the remote to operate it.
O Use the select switch on the remote control to choose t:he
layer that you set up to operate your laserdisc player, DVD
or AUDIO.
O Point the remote control at the laserdisc player and press
the desired buttons.
You can use the POWER, numbers (0-9), INFO, MENU, CANCEL,
STOP, PAUSE, REW, PLAY, ADJUST, and FF buttons to operate
your disc player.
using your remote to operate your Mitsubishi A/V receiver
After you have set up your remote control for your A/V receiver, you
can use the remote to operate it.
O Use the select switch on the remote control to choose the
layer that you set up to operate your receiver: AUDIO or TV.
Point the remote control at the A/V receiver and press the
desired buttons.
If you are using a Mitsubishi HTS-100 receiver; the POWER,
VOLUME, and MUTE buttons will operate :it.
If you are using a Mitsubishi HTS-300 receiver; the POWER,
CIZ_NNEL, INPUT, VOLUME, ENTER, number (0-9), INFO,
MENU, CANCEL, AUDIO, VIDEO, ADJUST, and MUTE buttons
will operate it.
If you are using a Mitsubishi M-VR400, M-_rR600, M-VR800 or
M-VR1000; the POWER, VOLUME, numbe:_ (0-9), and MUTE
buttons will operate the receiver. The ADJUST buttons will
operate the M-VR800 and M-VR1000 menu,s.
If you are using a Mitsubishi M-CD500 CD player; the PLAY,
PAUSE, STOP, FF, and REW buttons will operate it.
Getting Started 39