Advertisement
Connection
ofTV
toVCR
and Antenna
or
Wall
Outlet
Cable
Antenna/Cable
Connections
I, Connect the incoming cable toANT-A
on theTV back panel,
2, Connect two coaxial cables as follows:
• One from CABLE LOOP-OUT
on the
TV back panel toANTENNA
IN on the
VCR back panel,
• One fromVCR
back panelANTENNA
OUT to ANT-B on the TV back panel,
If your VCR has a video channe{
ON/OFF switch, set it to OFF,
® ®
i@ii@ @
_T A _JTA_T
®
Audio/Video
Connections
I. Connect a video cable fromVIDEO
OUT on theVCR back panel toVIDE@
INPUT I or INPUT 2 on theTV back
panel.
If you have a S-VHS VCR, follow the
same steps, using the S-Video terminals
on the VCR and TV.
2. Connect a set of audio cables from
AUDIO
OUT on theVCR back panel to
AUDIO
INPUT on the TV back panel.
The red cable connects to the R (right)
channel and the white cable connects to
the L (left). If your VCR is non-stereo,
only connect the L (left) cable.
VCR Sack Panel
If your VCR has
a video channel
ON/OFF switch,
set it to OFF
®
II
Advertisement
