Mitsubishi WS-65807 Owner's Manual page 22

Part I1: Installation
Connecting the Active A/V Network
(Figure 1)
The Active A/V Network is a special feature
that makes it easier to use your TV and
Mitsubishi VCR equiped with Active A/V Net-
work. This feature will automate common
TV-to-VCR functions. For Mitsubishi VCRs
having an A/V Network, but not an Active
A/V Network, this connection will pass the
remote control commands to your hidden
VCR.
[] Connect the Active A/V Network cable
from ACTIVE A/V NETWORK on the TV
back panel to ACTIVE A/V NETWORK
IN, or A/V NETWORK IN on the back of
your Mitsubishi VCR.
[] Turn the Active A/V Network on through
the A/V Connection Menu, page 32.
TV back pai/al
mm
Figure 1. Connecting the Active A/V Network.
Connecting the Home Theater IR System
(Figure 2)
[] Connect the IR emitter to IR HOME
THEATER on the TV back panel.
[] Place the IR emitter cable under or
along the side of the A/V receiver.
Place the IR lens directly in front of the
A/V receiver's infrared signal receiver.
Infrared signal receivers are usually
behind the front translucent panel of the
receiver.
[] Place the unused transmitter in an out-of-
the-way location.
[] For permanent installation of the IR
emitter cable, use the included adhesive
tape to secure the bottom of the emitter
to the anchoring object of your choice.
TV back paI/el
mm
I_ MJtsubish[
,evV Receiver
Figure 2. Connecting the Home Theater IR System.