Table of Contents
Advertisement
After attaching all necessary cables to your monitor and computer, (See
to organize all cables as shown above.
Attaching the Soundbar (Optional)
CAUTION:
Do not use with any device other than the Dell Soundbar.
NOTE: The Soundbar power connector (+12 V DC output) is for the optional Dell Soundbar only.
To attach the Soundbar:
1.
Working from the back of the monitor, attach the Soundbar by aligning the two slots with the two tabs along the bottom of the monitor.
2.
Slide the Soundbar to the left until it snaps into place.
3.
Connect the Soundbar with the DC power connector.
4.
Insert the mini stereo plug from the back of the Soundbar into the computer's audio output jack.
Removing the Stand
NOTE:
To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a clean surface.
This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for set up
NOTE:
instructions.
To remove the stand:
To remove the stand:
1. Place the monitor on a flat surface.
2. Press and hold the Stand release button.
3. Lift the stand up and away from the monitor.
Wall Mounting (Optional)
Connecting Your Monitor
for cable attachment,) use the cable management slot
Advertisement
Table of Contents
