Accessing The Menu System; Using The On-Screen Display (Osd) Menu - Dell P2011H User Manual

5 Use the Power button to turn the monitor on and off.
The Blue LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power
save mode.
Power
(with power light
indicator)

Using the On-Screen Display (OSD) Menu

Accessing the Menu System
NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The
changes are also saved if you change the settings and then wait for the OSD menu to disappear.
1. Press the MENU button to launch the OSD menu and display the main menu.
Main Menu for Analog (VGA) Input
or
Main Menu for Digital (DVI-D) Input
NOTE: AUTO ADJUST is only available when you use the analog (VGA) connector.
2. Press the and buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the
following table for a complete list of all the options available for the monitor.
Press the or button once to activate the highlighted option.
3.
4. Press the and buttons to select the desired parameter.
5. Press to enter the slide bar and then use the
6. Press the button once to return to the main menu to select another option or press the
Icon Menu and Submenus Description
Energy Gauge
or button, according to the indicators on the menu, to make your changes.
This meter shows the energy level being consumed by the monitor in real time. When the meter is green, it indicates the monitor is
consuming low energy level. When the energy consumed increases, the meter will change to yellow and subsequently red.
button two or three times to exit from the OSD menu.