Table of Contents
Advertisement
Aspect Ratio
Horizontal Position
Vertical Position
Sharpness
Pixel Clock
Phase
Dynamic Contrast
Reset Display Settings
OTHER SETTINGS
Adjusts the image ratio as Wide 16:9, 4:3, or 5:4.
NOTE: Wide 16:9 adjustment is not required at maximum preset resolution 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M) .
Use the
or
buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).
Use the
or
buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).
This feature can make the image look sharper or softer. Use
The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. Use
quality.
If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine), again.
Allows you to increase the level of contrast to provide sharper and more detailed image quality.
NOTE:
Dynamic Contrast is not available (greyed out) in Energy Smart modes.
Select this option to restore default display settings.
Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on screen, and
so on.
or
to adjust the sharpness from '0' to '100'.
or
buttons to adjust for best image
Hide quick links:
Advertisement
Table of Contents
