Maytag Jetclean MDB9000 User Manual page 5

Upper Rack
The upper rack is designed with flexibility and versatility. Glasses, cups, stemware, light-weight plastics, small plates,
bowls, pans, long-handled utensils etc. can be loaded in this rack. Do not load glasses over the tines.
Correct Incorrect
I Ine
out
in
The Vari-Lock '_ Snugger (certain models) on the left
secures lightweight items in place. It can be adjusted by
grasping the curved wire and rotating it left to snug
items against the outer rack or to the fight to rest on top
of light items. Do not load items on top of the wire.
The Stack-Rack design on the right side of the upper
rack folds up or down for loading flexibility of a variety
of items. Fold it down to hold long-handled knives, spat-
ulas and spoons or short items like cups or juice glasses.
Fold it up for taller items like glasses, bowls, plates, etc.
The curved wire on the Vari-Lock
TM
Snugger (certain
models) and the Stack-Rack is designed to hold
stemware in place. Taller stemware will fit better on the
right side as the upper rack is deeper on this side.
IlJl eo • • eeo oo I) o eoleeoo eooe coo oo eo eeoe o ee oo o ego o ooo_ a oe
Removing the Upper Rack
The upper rack can be removed when tall or oversized items need to be loaded into the lower rack. Note: Be sure not to
load items so they rest over the center wash tower.
To remove:
• Roll the upper rack 1/3 to 112 of the way out.
• Remove the plastic rack stop from the end of each
track. To remove each plastic rack stop, push in-
ward (towards the rack) on the ridged area of the
rack stop. The rack stop will snap open and can be
easily removed by pulling straight out. Take care to
support the track while removing rack stops.
• Roll the rack all the way out of the track and
remove from the dishwasher.
• Reverse the above procedure to replace the upper
rack into the dishwasher.
Rack
4