Advertisement
lease make these simple
checks before
calling for
service.
Theses tips can save you
time and money since charges for
TV installanon
and adjustment
of
customer
controls
are not
covered
under your warranty.
No Power
No Picture
No Sound
Remote
Does Not
Work
TV Displays
Wrong
Channel
or No
Channels
Above
13
CAUTION:
A video source (such as a video game, Compact
Disc Interactive
- CDI, or
TV information
channel)
which shows a constant
non-moving
pattern on the TV screen,
can cause picture
tube damage.
When your TV is continuously
used with such a source
the pattern of the non-moving
portion of the game (CDI, etc.) could leave an image
permanently
on the picture tube.
When not in use, turn the video source OFF.
Regularly
alternate
the use of such video sources with nolmal "IV viewing.
Check the TV power cord.
Unplug
the TV, wait 1 minute,
then reinsert plug into outlet 1
and push POWER
button again.
I
Check to be sure outlet is not on a wall switch.
i
heck antenna connections
on the rear of the TV. Are lhey properly
secured
to the
antenna
plug on the TV?
Check
the CABLE/YES
NO control for correct position.
Check INPUT
control for correct position.
VCR-AUX
position without
a signal
source will result in a blank screen.
Check the VOLUME
buttons.
Check the MUTE button on the remote: control.
If attempting
auxiliary,
equipment
hook-ups,
check audio jack connections.
I
heck TV-VCR-CBL
"'System"
butto:as on the remote.
Press the remote's
TV System
button
to send commands
to the TV.
Check batteries.
Replace
with AA Heavy Duty (Zinc Chloride)
or Alkaline
batteries
if necessary.
Clean the remote
and the remote
sensor window
on the TV.
I Repeat channel
selection.
Add desired channel
numbers
(CHANNEL
control)
inlo TV memory.
Check CABLE/
YES
NO control for correct position.
This TV is equipped with protective circuitry, that shuts the TV off in case of moderate
power surges. Should this occur turn the TV back on bl/pressing
the POWER button
once or twice, or unplug and then replug the power cord at the AC outlet.
This feature is NOT designed to prevent damage due to high power surges such as those
caused by lightning, which is not covered b_ your warranty.
Cleaning
and Care
• To avoid possible
shock hazard be sure the TV is unplugged
from the electrical
outlet before cleaning.
• When cleaning
the TV screen take care not to scratch or damage
the screen surface (avoid wearing jewelry
or using
anything
abrasive).
Wipe the front screen with a clean cloth dampened
with water.
Use even, easy, vertical strokes when
cleaning.
• Gently wipe the cabinet
surfaces
with a clean cloth or sponge dampened
in a solution
of cool clear water.
Use a clean dry
cloth to dry the wiped surfaces.
• Occasionally
vacuum
the ventilation
holes or slots in the cabinet
back.
• Never use thinners,
insecticide
sprays,
or other chemicals
on or near the cabinet,
as they might cause permanent
marring
of the cabinet finish.
3O
Advertisement
