Advertisement
whether
you're watching a
movie or a video game
your TV has automatic video
control settings matched for
your current program source
or content. The Smart Picture
feature quickly resets your
TV's video controls for a
number of different types of
programs and viewing condi-
tions you may have in your
home. Each Smart Picture
setting is preset at the factory
to automatically
adjust the
TV's Picture, Color, and
Sharpness viewing control
levels.
Press the Smart
Picture button on the remote.
Press the Smart Picture
button repeatedly to select any
one of the preset viewing cate-
gories (Example: Video Games,
Movies, etc.).
Press STATUS button on
the remote control to clear the
screen.
Remember,
i
the Smart Picture
video control set-
tings are memorized
into the TV at the
factory and can
only be reset by
field and service
technicians.
With the Smart
Picture control dis-
played, the Menu
AY buttons can
also be used to
make your selec-
tions.
re you tired of the sound
of commercials
following
you into the next room or all
through
the house?
Smart
Sound allows you to preset
a
desired
volume
level that the
TV sound
will not go above.
This makes for an even, more
consistent
sound by reducing
the
peaks
and valleys that
can occur during program
changes
or commercial
breaks.
the Smart Sound
button on the remote.
<_>Press
the Smart Sound
button repeatedly to turn the
volume level control ON (or
OFF.)
<
<"'Press the STATUS button
to clear the screen when com-
pleted.
SMART SOUND
ON
Remember,
g
Smart Sound can
also be selected
with the TV's on-
screen Menu. Just
press the (+) or (-)
buttons to turn the
SMART SND con-
trol ON or OFF.
se the Volume Bar con-
trol to see the TV's vol-
ume level settings on the TV
screen. Once set the Volume
Bar will be seen each time
the VOLUME buttons (on the
TV or remote) are pressed.
Press MENU • or •
on the TV (or on the remote
press M button and then M
• • buttons.)
Select the word VOL.BAR
with the TV's on-screen Arrow.
__
(+) or (-) buttons to
._P--r_
STATUS button to
turn the VOL BAR control ON. I Iclear the screen.
Try it out.
i
Press the VOL••
buttons. The VOL-
UME BAR should
appear at the bot-
tom of the screen.
NOTE: The TV's
volume level may
also be lowered
when the set is
turned OFF.
our TV can receive
broadcast
stereo
TV pro-
grams.
The TV has both an
amplifier
and twin speakers
through
which the stereo
sound can be heard,
_econd
Audio
Program
k._ (SAP) is an additional
part of the stereo broadcast
system.
Sent as a third audio
channel
SAP can be heard
apart from the current
TV
program
sound.
TV stations
are free to use SAP for any
number
of purposes.
Many
experts
believe
it will be used
for
translations
of TV shows.
Press MENU • or •
on the TV (or on the remote
press M button and then M
• • buttons.)
Select the word STEREO
with
the TV's on-screen Arrow.
"-_" _--e-'e_(+) button to turn
the STEREO MODE ON.
,_Pr-'_-e_
STATUS button to
] [clear the screen.
1
STEREO
SECOND AUDIO PROGRAM
6
Remember,
li
if the TV is set to
STEREO but the
current channel is
not broadcasted in
stereo, the sound at
the TV will remain
monaural (mono.)
If a SAP signal is
not present with the
current channel, the
SAP option cannot
be selected. Also, if
SAP is selected on
a channel (with
SAP) and you select
another channel,
when you return to
the original channel
SAP will be OFF
(and you will have
to reselect the SAP
feature.)
Advertisement
