Vcr Mode - Philips 44PL9523 Directions For Use Manual

To use the TV remote control with a VCR,
first make certain it is set to control your VCR
using one of lhe programming methods
explained on pages 22 and 23.
Press lhe VCR mode button. Be sure
the button light thai appears is green.
Point the top of the remote toward the front of the VCR (remote sensor win-
dow) when pressing the buttons.
VCR Mode
Press to place the remote in a mode to con-
trol a VCR.
VCR Prog.
Many VCRs have an automatic program-
ming function. If your VCR has this func-
tion, the universal code set will assign it to
this function.
VCRTimer
Press to set up a timer recording in the VCR
on-screen menu.
• (Record)
Hold the • (Record) and Play _ buttons down
to begin a VCR recording.
Stop •
Press to stop the motion of a tape in play-
back, rewind, and fast forward.
Rewind _1_1
Press to rewind tapes. For some VCRs, the
Stop button may have to be pressed first,
then Rewind. In playback mode, hold down
the button to view the picture moving rapid-
ly in reverse.
Power
Press in turn the VCR on and off.
Cursor Up/Down/Left/Right
Press to navigale the VCR on-screen
customer controls.
CH (Channel Selection)
Press to scan up or down through the
VCR channel numbers,
Digits (Numbers)
Press in directly select VCR channels,
Pause II
Press in temporarily stop the tape dur-
ing playback or recording. Press again
to release Pause.
Play I_
Press in begin playback of a videotape.
Fast Forward
Press to rapidly advance the tape. For
some VCRs, you may need to press the
Stop button first, then the Fast Forward
button. In playback mode, hold the but-
ton clown to view lhe picture moving
rapidly in the forward direction.
Remember, the VCR buttons on the remote will
not operate your VCR if those features are not
found on your VCR remote control.
NOTE: All VCR functions (particularly Search,
Rewind, and Fast Forward) will operate the
same as with the remote control provided with
the VCR.
24