Magnavox DVD502AT Owner's Manual page 9

Hookups (cont'd) 9
• to,. Do6, ,otooeo Do6, .frog ooo• ,eo, ,eo_ *oetQooa*,too ooeot *oo6aq ooooo_ *oetl.,,o,, • ._oeeot, .itoQo .l_oQ6om • *°_ooQolo
Connectin__the DVD Player to a TV onl.v (no stereo or amplifier)
TV has audio (_redand white) and S-Video In iack_
• For better picturequality,usean optionalS-Video cableto connectthe S-VIDEO OUT jackon the DVD
Playerto the S-VIDEO IN jack on your'l'_.You will not usetheVIDEO OUT jack on the DVD Player, a nd you
will not need the yellow video cable.
• Set DOLBY DIGITAL and DTS to OFF on the DVD Player. D etailsare on pages38-39. If you playa DVD
when the settings are wrong, the sound will be distorted or you may damagethe speakers.
Q S-VIDEOIN
O LEFTAUO]OIN
RIGHTAUDIOIN
DVD Player
°u_ _sT
Back of'IV
• (example only)
I
Connect the red and white audio cables to the red and white AUDIO
OUT jacks on the DVD Player and to the red and white AUDIO IN jacks
on the TV, matching the cable colors to the jack colors.
2
Connect an S-Video cable (not supplied) to the S-VIDEO OUT jack on
the DVD Player and to the S-VIDEO IN jack on the'IV.
3
Connect the TV's power cord to a power outlet.
Turn on theTV and set it to the S-VIDEO IN channel.This channelusuallyis
located near channel 00. See yourTV owner's manual for details.
4
Connect the DVD Player's power cord to a power outlet•
Press the POWER button to turn on the DVD Player. "HELLO" will appear
briefly on the DVD Player's display panel.You should see the DVD logo on theTV
screen. If you do not, check your connections and make sure the TV is on the cor-
rect Audio/Video in channel,