Magnavox DVD502AT Owner's Manual page 10

I0 Hookups (cont'd)
Connectin_ to a TV and a Stereo
• Set DOLBY DIGITAL and DTS to OFF on the DVD Player. D etailsare on pages38-39. If you playa DVD
when the settings are wrong, the sound will be distorted or you may damagethe speakers.
Backof TV
(example only)
OVD Player 1
@o o@
i®0£
i 1
_l_¢k of Stereo
i (example only)
Connect the red and white audio cables to the red and whiteAUDIO OUT
jacks on the DVD Player and to the red and whiteAUDIO IN jacks on the
Stereo, matching the cable colors to the jack colors.
2
Connect the supplied video cable (yellow) to theVIDEO OUT jack on the
DVD Player and to theVIDEO IN jack on theTV.
(Or, you may connect an optionalS-Video cable to the S-VIDEO OUT jack on the
DVD Playerand to the S-VIDEO IN jack on the'l-_.)
3
Plug in the Stereo's power cord.Turn on the Stereo and select the Stereo's
Auxiliary IN station. During Disc playback,you will adjust the volume at your
Stereo. See your Stereo owner's manual for details.
4
Plug in theTV's power cord.Turn on theTV and set it to theVideo In chan-
nel (or S-Video In channel), which usually is located near channel 00. During
Audio CD playback, you may checkthe statusof Audio CDs on your'iV screen.During
DVD playback, you will watchthe programon theT_. Seeyour'iV owner'smanualfor
details.
5
Connect the DVD Player's power cord to a power outlet.
Press the POWER button to turn on the DVD Player. "HELLO" will appear
briefly on the DVD Player's display paneLYou should see the DVD logo on theTV
screen. If you do not, check your connections and make sure the "iV is on the correct
channel