Table of Contents
Advertisement
menu-lnsta,adon
;et{i }0
lnstallat{on
kangusoe
eltiF_
/ /!A I /[
Aut0pr0gram
Antenna
Select
the
menu
language
O
Press
the MENU
button
on the remote
control.
Use the
cursor
down
to select
Installation
in the
Settings
menu.
0
Use the
cursor
right to enter
the
Installation
menu.
0
Select
Language
and enter
the
list of available
languages
with
the
cursor
right.
Select
your
preferred
language
with
the cursor
up/down
and
press
the OK
button
to confirm
your
selection.
0
Proceed
with
the
Installation
menu.
Store
TV
channels
Select Autoprogram
in the Installation menu.
Use the cursor right to enter the Autoprogram
menu.
O
Select Cable
or Antenna
in the Installation mode.
When Antenna
is selected, the TV will detect antenna
signals and will search for antenna TV (NTSC and ATSC) channels
available in your local area.
When Cable is selected, the TV will detect cable company
supplied signals and will search for cable TV (NTSC, ATSC, QAH
modulated) channels available in your area.
Make sure that registration
with your cable TV provider and
connection
of equipment are completed.
Select Start
now with the cursor
right key.
0
Press the OK button.
0
Press the green button
"Start"
to start Autoprogramming.
The
menu screen
disappears
and the progress
of Autoprogramming
is displayed. The progress
bar indicates
the number
of analog and
digital TV channels
found.
Auto programming
may take up to 20 minutes to complete. Digital
channels will take longer than Analog to find and program. Please
wait until you see the Auto Programming complete message. The
TV will then switch automatically
to the first channel found.
Note: All channels must be unlocked in order to autoprograrn. If
requested, enter your PIN code to unlock all channels. (p. 28)
Note _:
o When you have locked TV channels bef'ore _n_t_atmg A utoprograrn, a messago a_pears asking _:oenter your PIN code in
order o c0mp_ete #,utoprograrnming
o When channe_update is intemup_:eo the new uodated channel information _sretumeo along _'_tt_the old un.updated
channel infom _at_on
o Channel in_rmation about an ATSC channel is updated only [or the ATSC channel curren ly _uned
o If an NTSC channe_ts _uned, then in background Autoprogrammmg the TV _ _ scan all me possible ATSC f?equenc_es
and uoaa_e mlorrnd non
o VCeak char nd installatkm allows you to m_n laHy tune weak ATSC cnameLs in order to uelust tt_e am:enn_ and thus
optimize signo! quality lot that channel (See lns_allatlon menu Weak channel _nstallat_on.p. 14 )
o Once you nave searched _or the available Antenna as we_ as the Cable TV channels, the}, ore stored m me memur,
o IfAntenna!cable signal Lsinterrup_ea more than 30 minutes_ TV wil! go into off:mode. You are requested to press Power button
or C H + f - button _o turn on the TV
13
Advertisement
Table of Contents
