Advertisement
_lease
make these simple
checks before calling for ser-
vice.
These tips can save you
time and money since charges for
TV installation
and adjustment
of
customer
controls
are not cov-
ered under yourwarranty.
No Power
No Picture
No Sound
Remote
Does Not
Work
TV Displays Wrong
Channel or No
Channels
Above
13
Cleaning and Care
'CAUTION: A video source (such as a video game, Compact Disc Interactive - CDI, or
TV information channel) which shows a constant non-moving pattern on the TV screen,
can cause picture tube damage. When your TV is continuously used with such a source
the pattern of the non-moving portion of the game (CDI, etc.) could leave an image per-
manently on the picture tube. When not in use, turn the video source OFF. Regutlarly
alternate the use of such video sources with normal TV viewing.
li
heck the TV power cord. Unplug the TV, wait 1 minute, then reinsert plug into outlet
and push POWER button again.
Check to be sure outlet is not on a wall switch.
Check antenna connections on the rear of the TV. Are they properly secured to the
antenna plug on the TV?
|
Check the CABLE TUNING control for correct position_
,,
|
Check PICTURE SOURCE control for correct position ' VCR/AUX
position without a|
signal source will result in a blank screen.
]
Check the VOLUME buttons.
Check the MUTE button on the remote control..
Check the TV SPEAKER ON/OFF control for the correct position.
If attempting auxiliary equipment hook-ups, check audio jack connections and that the
auxiliary equipment is on and in the proper operating mod.es.
Check TV-VCR-CBL "System" buttons on the remote, l_:ess the remote's TV_System
button to send commands to the TV; VCR System to sent to VCR; etc.
Check batteries. Replace with AA Heavy Duty (Zinc Chloride) or Alkaline batteries
if necessary.
Clean the remote and the remote sensor window on the TV.
li
epeat channel selection,
i
Add desired channel numbers (ADD/DELETE CHANNELS control) into TV memory.
Check CABLE TUNING control for correct position.
This TV is equipped
with protective
circuitry
that shuts the TV off in case of moderate
]
power surges. Should this occur turn the TV back on by pressing
the POWER
button
]
once or twice, or unplug and then replug the power cord at the AC outlet.
]
This feature
is NOT designed
to prevent
damage due to high power surges sl=ch as those ]
caused by lightning,
which is not covered
by your warramy.
]
• To avoid possible
shock hazard be sure the TV is unplugged
from the electrical
outlet befi)re cleaning.
• When cleaning
the TV screen take care not to scratch or damage
the screen surface
(avoid wearing jewelry
or using
anything
abrasive-
do not use household
cleaners).
Wipe the front screen with a clean cloth dampened
with water.
Use
even, easy, vertical
strokes when cleaning.
° Specially
designed
screen cleaning
kits are also available
which contain
anti-static
cleaners
and cloths designed
to get
into the ridges of the TV screen. If interested,
ask your dealer about the MAG4600
Projection
TV Screen Cleaning
Kit or
call our toll-free
,Accessory
Parts ordering
number
1-800-292-6066.
• Gently wipe the cabinet surfaces
with a clean cloth or sponge dampened
in a solution
of cool clear water and a mild soap
or detergent.
Use a clean dry cloth to dry the wiped surfaces.
• Occasionally
vacuum
the ventilation
holes or slots in the cabinet back.
• Never use thinners,
insecticide
sprays, or other chemicals
on or near the cabinet,
as they might cause permanent
marring
of the cabinet
finish.
42
Advertisement
