Advertisement
ur TV remote can be set to
ork your VCR or Cable
Converter
by what is called the
SEARCH
method.
/f the "REMOTE
CODE" number
method
shown in the previous
aec-
;ion did not set your remote to
work },our VCR or Converter,
then
follow
the easy steps listed below.
+Please read through
steps 1-4
before beginning.
@_
Press the POWER
button
on
the VCR or Converter
to turn tile
unit ON.
@_
Stand at least six feet away
]from the front of the VCR or
Converter.
]Point the remote
toward, the unit.
HOLD
DOWN
the SURF
and
the desired
System
(VCR
or
CBL-Converter)
buttons
at the
same time. KEEP HOLDING
BUTI'ONS
DOWN.
, Watch
the Channel
Indicator
on the unit.
Channel
Numbers
will SCAN UP
when the unit has been identified.
This may take up to two :minutes.
@_
Release the SURF
and System
(VCR
or CBL) buttons
as soon
as channel numbers
start to scan
tap. The code has been identified
and the remote
is ready to operate
with the VCR or Converter.
Remember,
a minute or
__ two can seem very long, but
the code should be located
within
two minutes.
]Don't let the VCR scan up more
than five channels.
If you do the
remote may pass up the right code
and another
two minute search
cycle will have to be repeated.
]if no channel
change happens
within two minutes,
repeat steps
1-4. Should a channel
change still
not occur, the remote will not
work with the desired
uniit.
CABLE CONVERTER
09]
34
Advertisement
