Autochron - Philips 51PP9910 User Manual

OAIIOw
the steps below to set
utoChron
TM
to download the time
from your PBS station to your TV.
After successful setup, AutoChmn
TM
will automatically maintain the correct
time using your PBS station until you
set the time using the AutoChron
TM
MANUAL option (see panel 30),
Press the MENU button.
The onscreen menu appears.
Then press the CURSOR
DOWN button repeatedly
until INSTALL is highlighted.
Press the CURSOR
RIGHT button to enter
the INSTALL submenu.
Then press the CURSOR
DOWN button repeatedly
until AutoChron is highlighted,
Press the CURSOR
RIGHT button to enter the
AutoChron SET TIME area,
Press the CURSOR
RIGHT button again to
select AUTO. Within a few
seconds, a menu containing
the time-zone options appears.
Press the CURSOR BUT-
TON UP or DOWN to
highlight your correct time
zone and Daylight Savings
Time option.
Press the number buttons
on your remote to enter the
channel number for your PBS
station (02, IS, or 121, for
example), Wait until the TV
completes its search.
Press the INFO/EXIT but- ton to exit the menu.
\
HEU' UL H m'S
• If the time was not found,
you will need to locate the
correct channel number
for your PBS station and
input that number,
• AutoChron must be set for
the AutoLock to work on
digital channels.