Philips 51PP9910 User Manual page 23

_|uJi/llll:l A • • • ' A [ol"i_'i_'_
ur AutoLock
TM
access code allows
ou to enter the AutoLock
TM
sub-
menus to set up or turn of_ blockJng,
Your access code is also the "'key" that
unlocks programs or channels that are
being blocked by AutoLock
TM
.
Press the MENU button on
the remote control to show
the onscreen menu,
Press the CURSOR
DOWN button twice to
highlight FEATURES.
Press the CURSOR RIGHT
button. Then press the CUR-
SOR DOWN button once to
highlight the AutoLock control.
Press the CURSOR RIGHT
button to activate the
AutoLock menu.
Press 0,0,0,0 on the remote
control. The AutoLock menu
will appear.
Press the CURSOR
DOWN button three
times, then the CURSOR
RIGHT button to open the
New Code screen,
Enter your new four-digit code twice.
Press the INFO/EXIT but-
ton exit the menu.
Use these steps to reset
your code if you lose it.
Instead of 0000 in step 5,
use 071 I. This is the reset
code.
record your I
>ersona/code below:
\ /
HELPFUL HINTS
If you discover that your access
code has been changed, you can
assume that blocked channels may
have been viewed.
• For the AutoLock to work with digKal
channels, the AutoChron must be set.
See panel 29,