Door And Drawer Removal - LG LFX25980 Series User's Manual & Installation Instructions

INS|AlIA|iON
HANDLE REMOVAL (CONT.)
HANDLE REINSTALLATION
f
Mounting
Fasteners
Place the handle on the door by adjusting
handle footprints to fit mounting fastners and
tighten the set screws with the 3/32" Allen
wrench.
NOTE: If the handle mounting fasteners need
to be tightened or removed use a 1/4" Allen
wrench
Place the handle on the door by adjusting
handle footprints to fit mounting fastners and
tighten the set screws on the bottom of the
handle with a 3/32" Allen wrench.
NOTE: If the handle mounting fasteners need
to be tightened or removed use a 1/4" Allen
wrench.
DOOR AND DRAWER REMOVAL
DOOR REMOVAL
kWARNING
Electric Shock Hazard
• Disconnect electrical supply to refrigerator before
installing. Failure to do so could result in death
or serious injury.
• Do not put hands or foot or metal sticks into the
air vents, base grille, or bottom of the
refrigerator. You may be injured or receive an
electrical shock.
• Be careful when you work with the hinge, base
grille, and stopper. You may be injured.
If your entrance door is too narrow for the
refrigerator to pass through, remove the
refrigerator door and move the refrigerator
sideways through the doorway.
Before you begin, remove food and bins from the
doors.
To remove the left refrigerator door:
Pull the water tube out of the fitting while
pressing the release ring on the fitting.
10