LG 47LBX Owner's Manual page 98

19. Red adjustment(Command:v)
To adjust red in color temperature
TransmissiOn [k] [v] [ ][set ID] [] [Data] [Cr]
Data Min:0 - Max:C8
*Refer to "Real data mapping 2". See page 9Z
Acknowledgement:
[V][] [set Ib][] [OK_NG] [Data] [x]
20. Green adjustment(Command:w)
To adjust green in color temperature.
TranSmission[k] [w][ ][Set [D] [] [Data] [cr]
Data Min:0 - Max:C8
*Refer to "Real data mapping 2". See page 9Z
Acknowiedgemen_ [w][ ][set ID][ ][OK/NG] [Data] [X]
21. Blue adjustment(Command:S)
To adjust blue in color temperature.
Transmission [k] [$][ ][set ID] [] [Data] [Cr]
Data Min:0 - Max:C8
*Refer to "Real data mapping 2". See page 9Z
Acknowledgement: [$][] [set Ib] [] [OKZNG] [Data] [x]]
*Real data mapping 2
0 :-20
5 :-19
A:-18
5F: -1
64:0
69:+1
C3 : +19
C8 : +20
22. Tune Command (Command: m a)
To tune channel to following physical/major/minor num
ber.
TransmlSsiOn [m] [a][] [set !D] [ ] [Data0] [ ] [Data]]
[ ] [Data2] [] [Data5][ ] [Data4] [] [Data5] [Cr]
Data 0: Physical Channel Number(Transmit by
Hexadecimal code)
NTSC air:02-45
NTSC cable: 01,0E-7D
ATSC air:01-45
ATSC cable:01-87
Data1 ,Data2: Major Channel Number (two part) /
Channel Number (One part)
Data1 : High byte
Data2: Low byte
Two part channel number:
Major number-Minor number
One part channel number:
If the channel band is ATSC digital cable, it can
be used. In case of using one part channel num-
ber, minor channel does not need.
Data3, Data 4: Minor Channel Number
Data3: High byte, Data4: Low byte
m
Z
X
97