LG 32LD550 Owner's Manual page 56

EXTERNAL EQUIPMENT SETUP
m
x
-4
m
z
]>
r'-
m
_)
c
13
m
z
-4
U3
m
-4
c
13
Wired Network Setup
If wired and wireless networks are both available, wired is the preferred method.
After making a physical connection, a small number of home networks may require the TV network
settings to be adjusted.
For detail information, contact your internet provider or router manual.
Appeared when wired and
wireless are simultaneously
connected.
If you already set the
Network Setting
Previous setting value exists, Do
yoo want to connect with the
previous setting?
IP Auto Setting
IP Manual Setting
¢
®®
i/iiiiiiiiiiiiii
J
4-
Select the {P setting rnoae.
{P Mode
• tP Address
• Subnet Mask I
• Gateway
• DNS Server
nsert the {P address.
IP Mode
• IP Address
• Subnet Mask
" Gateway
" DNS Server 2_.25,S g 9
56
Select NETWORK.
Select Network Setting.
Select Wired.
If you already set Network SelCing:
Select Resetting. The new connection
selfings resets the current network
selfings.
Select IP Auto Setting or IP Manual
Setting.
When Selecting IP Manual Setting:
IP addresses will need to be input
manually.
Select Enter.
_ This feature requires an always-on
broadband internet connection.
_ You do not need to connect to a PC
to use this function.
_ If Network Setting is not working,
check your network conditions. Check
the LAN cable and make sure your
router has DHCP turned on if you
wish to use the Auto Setting.
_ If the Network Setting is not com-
pleted, network may not operate nor-
mally.
_ IP Auto Setting: Select it if there is a
DHCP server on the local area net-
work (LAN) via wired connection, the
TV will automatically be allocated an
IP address. If you're using a broad-
band router or broadband modem
that has a DHCP (Dynamic Host
Configuration Protocol) server func-
tion. The IP address will automati-
cally be determined.
_ IP Manual Setting: Select it if there is
no DHCP server on the network and
you want to set the IP address manu-
ally.