Signal Menu; 3D Y/C Filter - Panasonic TH-58PF20U Operating Instructions Manual

SET UP for Input Signals

SIGNAL menu

Note:
"SIGNAL" setup menu displays a different setting condition for each input signal.
1
2
3
4

3D Y/C FILTER

This menu is displayed when BNC Dual Video Terminal Board (TY-FB9BD) is installed to the unit.
Select "SIGNAL" from the "SET UP" menu during Video (S Video) input signal mode.
("SIGNAL [VIDEO]" menu is displayed.)
Note:
When ON, this setting only affects NTSC input signals.
50
Press to display the SET UP menu.
Press to select the "SIGNAL".
Press to display the SIGNAL menu.
Press to select the menu to adjust.
Press to adjust the menu.
Press to exit from adjust mode.
– For NTSC AV images
Press to select the "3D Y/C FILTER (NTSC)".
Press to set ON / OFF.
For VIDEO (S VIDEO)
[ VIDEO ]
SIGNAL
3D Y/C FILTER (NTSC)
ON
AUTO
COLOR SYSTEM
3 : 2 PULLDOWN OFF
NOISE REDUCTION OFF
For COMPONENT
[ COMPONENT ]
SIGNAL
SYNC
AUTO
OFF
3 : 2 PULLDOWN
XGA MODE AUTO
NOISE REDUCTION OFF
H-FREQ. 63.98 kHz
V-FREQ. 60.02 Hz
SIGNAL FORMAT 1280×1024/60
SET UP
SIGNAL
SCREENSAVER
EXTENDED LIFE SETTINGS
INPUT LABEL
COMPONENT/RGB-IN SELECT
RGB
POWER SAVE OFF
STANDBY SAVE
OFF
PC POWER MANAGEMENT OFF
DVI-D POWER MANAGEMENT
OFF
AUTO POWER OFF
OFF
ENGLISH ( US )
OSD LANGUAGE
Press ACTION ( ) button
For RGB
SIGNAL
SYNC
AUTO
3 : 2 PULLDOWN
XGA MODE AUTO
NOISE REDUCTION
H-FREQ. 63.98 kHz
V-FREQ. 60.02 Hz
SIGNAL FORMAT 1280×1024/60
For Digital
SIGNAL
3 : 2 PULLDOWN
NOISE REDUCTION
H-FREQ. 63.98 kHz
V-FREQ. 60.02 Hz
DOT CLOCK FREQ. 108.0 MHz
SIGNAL FORMAT 1280×1024/60
3D Y/C FILTER (NTSC) ON
1/2
[ RGB ]
OFF
OFF
[ Digital ]
OFF
OFF