Changing The Sewing Lamp - Pfaff hobby 1022 Instruction Manual

Maintenance and troubleshooting
Removing the needle plate
Raise the presser foot holder (26) and
remove the presser foot. The needle must
be at its highest position.
• Remove the detachable work support
(13). Loosen the two screws with the
screwdriver and lift the needle plate
(14).
• Clean the feed dog (22) with the brush.

Changing the sewing lamp.

• Remove the detachable work support
(13). The sewing lamp (bulb) is located
inside the needle head of the machine.
Turn the bulb half a rotation counter
clock-wise and remove the bulb. Insert
the bulb in the reverse order.
Important! The maximum permissible
wattage of the bulb is 15 watts.
Switch off the master switch (12).
63