Opel Automobile Owner's Manual page 140

140 Vehicle care
Low beam
1. Rotate cap 1 anti-clockwise and
remove.
2. Rotate bulb holder anti-clockwise
to disengage. Withdraw the bulb
holder from the reflector.
3. Detach bulb from bulb holder and
renew the bulb.
4. Insert the bulb holder, engaging
the two lugs into the reflector and
rotate clockwise to secure.
5. Rotate bulb carrier to right as far
as it will go.
6. Fit cap and rotate clockwise.
High beam
1. Rotate cap 2 anti-clockwise and
remove.
2. Detach wiring connector from
bulb.
Back to overview