Opel Antara Owner's Manual page 45

Belt tensioners control indicator
The seat belt tensioners are monitored
electronically together with the airbags,
and their operational readiness shown by
the red control indicator v in the
instrument panel.
When the ignition is switched on, the
control indicator flashes several times then
extinguishes. If it does not flash, stays lit,
illuminates or flashes whilst driving, there is
a fault with the belt tensioners or in the
airbag systems. The systems might not
therefore be triggered in the event of an
accident (see also page 56).
9
Warning
Have the cause of the fault remedied by
a workshop.
The system's integrated self-diagnostics
allows faults to be quickly remedied.
Important
z Accessories not released for your vehicle
type and other objects must not be fixed
or placed within the action zone of the
belt tensioners, as they may result in
injury if the belt tensioners are triggered.
z Do not make any modifications to the
components of the belt tensioners, as
this may result in unintended actuation
of the belt tensioners, rendering the
vehicle unroadworthy and causing
serious personal injury.
9
Warning
Improper handling (e.g. removal or
installation) can activate the belt
tensioners – risk of injury.
Seats, interior
z The belt tensioner and airbag system
control electronics can be found in the
centre console area. In order to avoid
malfunctions, do not store magnetic
objects in this area.
z When using the rear seats, ensure that
the front seat belt components are not
damaged by shoes or other objects.
Avoid dirt getting in the retractors.
z The belt tensioners only actuate once,
indicated by continuous illumination of
control indicator v in the instrument
panel. Deployed belt tensioners must be
replaced by a workshop.
z When disposing of the vehicle, observe
the applicable safety regulations. Take
the vehicle to a recycling company for
disposal.
45
Back to overview