6. Replace lamp assembly by guiding lugs
on lamp assembly into their holes (see
black arrows in illustration).
7. Replace 2 screws removed earlier and
close the tailgate.
License plate lamps
1. Remove 4 screws (arrowed) and remove
lamp covers.
2. Remove bulb holder from lamp assembly
by rotating it anti-clockwise.
3. Pull bulb straight out of bulb holder.
4. Install new bulb.
5. Reinstall bulb holder into lamp assembly,
rotate bulb holder clockwise and ensure
it is secure.
6. Replace lamp covers using 4 screws
removed earlier.
Self-help, vehicle care
Front reading lamps
1. Using a suitable screwdriver, pry lamp
lens away from roof lining.
2. Remove bulb.
3. Install new bulb.
4. Reinstall lamp lens in roof lining.
189
Back to overview