Identification Plate - Opel MOVANO Owner's Manual

166 Technical data

Identification plate

The identification plate is located on
the right hand door pillar.
The identification plate on your vehicle may differ from the illustration shown.
1)
Information on identification plate
1 = Vehicle identification number
2 = Permissible gross vehicle
weight rating in kg
3 = Permissible gross train weight
in kg
4 = Maximum permissible front
axle load in kg
5 = Maximum permissible rear
axle load in kg
6 = Trim code
7 = Technical specifications of
vehicle, including: Vehicle
paint code, equipment level
and vehicle type
8 = Additional equipment
specification
9 = Fabrication number
10 = Interior trim code
The combined total of front and rear
axle loads must not exceed the
permissible gross vehicle weight. For
example, if the front axle is bearing its
maximum permissible load, the rear
axle can only bear a load that is equal
to the gross vehicle weight minus the
front axle load.
1) :
The technical data is determined in
accordance with European
Community standards. We reserve
the right to make modifications.
Specifications in the vehicle
documents always have priority over
those given in this manual.
Engine identifier code and
engine number
Stamped on the engine cylinder block
and on a label attached to the timing
chain cover, depending on variant.