4. Disengage locking tabs and
remove bulb holder.
5. Push bulb into socket slightly,
rotate anti-clockwise, remove and
renew bulb.
Tail light/brake light (1)
Turn signal light (2)
Rear fog light, may be only on one
side (3)
Reverse light (4)
6. Engage bulb holder into the tail
light assembly. Connect wiring
plug. Install tail light assembly in
body and tighten securing nuts.
On the right side, fit the insert with
tyre repair kit. Engage side cover.
On the left side engage retainer of
the load compartment cover.
7. After bulb replacement, check the
tail lights for proper functionality:
switch on the ignition, operate the
brake, switch on the sidelights.
Side turn signal lights
Have bulbs replaced by a workshop.
Vehicle care
Number plate light
1. Insert screwdriver in bulb
housing, press to the side and
release spring.
165