Software Upgrade - Philips 24HFL2808D/12 User Manual

Electronic Program Guide
Some, but not all channels send information about
the current and next programs. Press the "EPG"
button to view the EPG menu.
Up/Down/Left/Right: Navigate EPG.
OK: Displays program options.
INFO: Displays, in detail information on program
selected.
GREEN: Switches to List Schedule EPG.
YELLOW: Switches to Timeline Schedule EPG.
BLUE: displays filtering options.
Program Options
In EPG menu, press the OK button to enter the
Event Options menu.
Select Channel
In EPG menu, using this option, you can switch to the
selected channel.

Software Upgrade

Your TV is capable of finding and updating new
software upgrades over broadcast channels (if
available). For broadcast channels search, TV looks
the available channels stored in your settings. So
before software upgrade search, it is advised to auto
search and update all available channels.
1. Software Update via USB Input
Before starting..
Ensure that you have a USB flash disk with
appropriate free space. Do not use a USB hard disk
drive for the software update process.
Get software updates from your dealer or
www. philips.com/support.
Check the current software version of your TV using
the MENU> Settings> Other Settings> Software
Upgrade item. If the version you have found is not
newer than the current version on your TV, it is not
necessary to update your product. Do not install a
lower version of the software since this may cause
problems.
 After obtaining the most recent software, copy
the BIN file to the USB flash disk.
 Now connect the USB flash disk to the USB
input of your TV.
 Switch off your TV using the main control
switch of the TV and unplug the power cord.
Studio 24/26HFL2808D/12
 Hold the remote control towards the TV.
Now press the OK button and keep pressing
the OK button (Do not release the OK button
now).
 Plug the TV to the mains and switch on the
TV.
 Keep pressing the OK button five seconds
more after the TV switches on and release it
afterwards. Software update process should
now start.
 The TV will switch on in First Time Installation
mode after the software update finishes.
IMPORTANT
 Do not press any other buttons on the TV or on
the remote control during the software update.
 Do not remove the USB flash disk from the TV
during the process.
 To prevent accidental updates, please use your
computer to delete the BIN file on your USB flash
disk after the software update is successfully
finished.
2. 3 AM search and upgrade mode
If Automatic scanning in Upgrade Options

menu is enabled, TV wakes up at 03:00 and
searches broadcast channels for new software
upgrade. If new software is found and
downloaded successfully, with next power up
TV opens with new software version.
Note on reboot operation: Reboot is the last step in
software upgrade operation if download of new
software is finished successfully. During reboot TV makes
final initialization. In reboot sequence panel power is
closed and front led indicates the activity with blinking.
Around 5 minutes later TV restarts with new software
activated. The TV may start in first time installation
mode.
 If your TV fails to restart in 10 minutes, unplug
power for 10 minutes and re-plug again. TV
should open with new software safely. If you
still cannot get TV working, please kindly
repeat unplug and plug sequence a few times
more. If your set still cannot operate, please
call the service personnel to fix the problem
for you.
Caution: While led is blinking during reboot do not
unplug your TV's power. Doing this may cause your TV
not to re-open again and can only be fixed by service
personnel.
P a g e | 17