Get Started - Philips SHD9000 User Manual

3 Get Started

Note
•
Before using the headphones for the first time, charge
the supplied batteries for at least eight hours. Only
rechargeable NiMH batteries can be charged. Use the
batteries (capacity over 700mAh) to ensure the 20
hours' operating time from fully charged.
•
AAA alkaline batteries can be used to operate the
headphones.
•
Use Philips power adaptor only.
•
If no audio input for over five minutes, the transmitter
automatically turns to standby.
•
The docking station does not transmit audio signal
during charge.
1
Install/Replace supplied batteries (Fig.B).
2
Power on the transmitter (Fig.C).
3
Power off the headphones and charge the
headphones (Fig.D).
4
Connect audio and adjust ATT
(Attenuation of audio input signal) (Fig.E).
• For portable CD player, MP3 player
or other devices with 3.5mm triport
socket output, switch ATT to 0dB.
• For HiFi, TV, DVD player or other
devices with RCA socket output,
switch ATT to -8dB.
5
Power on the headphones (Fig.F).
6
Adjust the volume (Fig.G).
EN
5