Crisper And Crisper Cover; Temperature-Controlled Drawer; Preset Temperature Control; Custom Temperature Control - KitchenAid KFIS29PBMS00 Use & Care Manual

The humidity level in the crisper drawers is automatically
regulated, so there is no humidity control.
To remove and replace a crisper drawer:
1. Remove the drawer by pulling it open halfway. Then, lift up on
the drawer to remove it completely.
NOTE: If you unintentionally pull open the drawer to the
drawer stop, it will lock in place and you will not be able to lift
the drawer up and out.
2. Replace a drawer by placing it on the slide rails and pushing it
back into position past the drawer stop.
To remove the crisper(s) cover:
1. Remove crisper(s).
2. Holding the glass insert firmly with one hand, press up in
center of glass insert until it rises above the plastic frame.
Gently slide the glass insert forward to remove.
3. Lift the cover frame up and remove it.
To replace crisper(s) cover:
1. Fit back of cover frame into supports on side walls of the
refrigerator and lower the front of the cover frame into place.
2. Slide rear of glass insert into cover frame and lower front into
place.
TemperatUreoCOntroHed Drawer (on some models)
The full-width, temperature-controlled drawer can be used to
store large deli trays, fresh meat, beverages or other items that
you want to store at a specific temperature.
NOTE: Do not place leafy vegetables in the temperature-
controlled drawer. Colder temperatures could damage leafy
produce.
Preset Temperature Control
IMPORTANT: The control is for this drawer only. It will not affect
the temperature of, or turn off cooling to the refrigerator or freezer
compartments.
For your convenience, temperatures have been preset for the
optimum storage of fresh meat, party trays, deli and wine.
Press PRESET to toggle among the following four temperature
settings. Each icon will light up, in turn, and the preset
temperature will display:
• Fresh Meat - 32°F (0°C)
• Party- 36°F (2°C)
• Deli (default setting) - 39°F (4°C)
• Wine- 41 °F (5°C)
NOTE: If no button is pressed the control will revert to Deli, the
default setting as shown.
Custom Temperature Control
Allows you to select the optimum temperature, within the
temperature range of the drawer, for your storage needs.
The temperature range for the drawer is 32°F (O°C) to 41°F (5°C).
• Press (+) or (-) to increase or decrease the temperature by
1 degree.
NOTES:
If you adjust the temperature to a non-preset
temperature, the word "custom" will light up. If you adjust
the temperature to a preset temperature, the preset food
icon will light up.
If you try to select a temperature outside the temperature
range of the drawer, an error tone will sound, and the
temperature display will not change.
Drawer Removal and Replacement
To remove the drawer:
1. Push the drawer completely closed.
2. Lift up the front of the drawer and pull it straight out.
To replace the drawer:
1. Push the metal glide rails to the rear of the refrigerator.
2. Place the drawer onto the glide rails. While tilting the rear of
the drawer upward, slide the drawer toward the rear of the
refrigerator.
26