Disengagement Of Follower - Kenmore 385.11602090 Service Manual

SEWING MACHINE
SOURCE 385
PAGE 18
DIV. 20
MODEL 385. 11602090
385. 12708090
385. 12710090
385. 12712090
385. 12714090
DISENGAGEMENT OF CAM FOLLOWER
MACHINE SETTING: I.
CHECK: I.
STITCH SELECTOR : [ ,{= ]
l
IN CASE THE NEEDLE BAR MAKES ZIGZAG MOVEMENT AT [,_= ], OR THE STITCH
SELECTOR DOES NOT TURN OR DOES NOT MAKE A SMOOTH TURN, MAKE
ADJUSTMENTS AS FOLLOWS:
ADJUSTMENT:
I. REMOVE THE ARM COVER PLATE, THE BELT COVER AND THE CONTROL PANEL
UNIT.
2. TURN THE HAND WHEEL TOWARD YOU BY HAND UNTIL THE CAM FOLLOWER (A)
COMES UP TO THE TOP OF THE BASIC ZIGZAG CAM (B) AS SHOWN.
3- LOOSEN THE SCREW (C) AND PUSH THE CONVEX PART OF THE CAM FOLLOWER
LEVER (D) IN THE DIRECTION OF .._ UNTIL THE LEVER TOUCHES
THE STITCH SELECTOR CAM.
4. TIGHTEN THE SCREW (C).
5. ATTACH THE CONTROL PANEL UNIT, THE _BELT COVER AND THE ARM COVER
PLATE.
C
STITCH
SELECTOR CAM