Cabinet Assembly - Kenmore 272.98201.490 Owner's Manual

Understanding H owthe "ARROW-LOC"CamFastenerWorks.
ARROW
TOWARDS
HOLEIN
EDGE
1. Position bolt in 2. Press cam into 3. Insert bolt through
pre-drilled hole and pre-drilled hole until pre-drilled hole in
turn until tight, flush with surface, edge of panel.
4. To lock, rotate cam
until tight, using
allen key provided.
Cabinet Assembly
Step 1. Place Top, Partition and Left and Right Sides on a flat protected surface (to prevent
scratching of parts) and thread connecting bolts (21 total) into pre-drilled holes (as shown in
FIG. 1). Turn Partition over and thread in the remaining bolts as indicated below (FIG. 1A).
NOTE: I
• = Connecting Bolt
FIG. 1
o o o o
o o o o
o o o
o o o
Left Side Panel Right Side Panel
°°°Zo °°
Top Assembly
FIG. 1A
Partition / °
(viewed form _.
Partition
(viewed form right)
98200-3
Page 3 98201-3