Table of Contents
Advertisement
BULBCHANGING
Electrical Shock Or Personal Injury Hazard
Disconnect electrical supply before servicing or
cleaning the unit. Failure to do so could result in
electrical shock or personal injury from cleaner
suddenly starting.
i-
Disconnect
the power cord from the electrical
outlet.
Press the handle
release pedal to
let the upper
portion of the
cleaner
lay back
against the floor.
Locate the base
screw which
attaches
the
base cover to
the base.
Remove the base
screw,
CAUTI
I
Do not remove the two screws on the upper
I
I
body which are located to the left and right of
I
the bose screw.
Place hands on the sides of the base cover so that
your fingers extend to grasp the lower edge of the
base cover.
Gently pull
the base
cover away
from the base
and lift up.
Lay the base
cover aside.
Base Cover
Lift the
protective
shield. To
release the
light bulb,
carefully push
the bulb in and
turn to the left.
Protective Shield
To Release
Pull the light bulb to
remove.
To replace the light bulb
carefully insert and turn it
to the right.
(NOTE: See page 2 for
Bulb #.)
Replace the base screw.
Replace the
base cover
over the
base. Press
down firmly
so the cover
snaps onto
the base.
Handle
Release
Pedal
• Upper
Body
Base Screw
Advertisement
Table of Contents
