Other Features; Sound Mute - JVC AV21BT7EPS Instructions Manual

Select t hePROGRAM. menupressing "PA" or "Pv" but-
tonandopenit pressing " 4"or"1," b utton. Whenyouenterthe
programme m enu, a ll the programme n umbers andnames
willbedisplayed o nthescreen. T heprogramme n umber a nd
nameof thetunedchannel willbe shown bythe redcolour.
All the otherchannel n umbers will be blackandat firstthe
programme number 0 will be flashing. Y oucan movethe
flashing number u sing "PA" or"Pv" or"4"or"I,"button. As
youpassthrough theprogramme n umbers t hisway, t o reach
theprogramme n umber y ouwant,thechannels c orrespond-
ingtothe programme n umbers youpassthrough willnotbe
tuned.
Pressing t heREDbutton willtunethechannel ontheflashing
programme n umber. Nowthecolour oftheflashing program-
menumber w illbered.Again youcanuse"PA" or"Pv" or
"4"or"1," b utton tomove theflashing number.
I=1 _[_"]H_"]]I
To delete a channel from a programme number:
• Move the flashing onto the channel you want to delete.
• Press the YELLOW button. Now the corresponding channel
will be deleted and all the other channels below this pro-
gramme number will be moved one programme number up.
To insert a channel into a programme number:
• Move the flashing onto the selected channel.
• Press the RED button, so that channel will be displayed on
the screen.
• Move the flashing onto the selected programme number.
Now pressing the GREEN button will insert the channel on
screen displayed into that programme number. If a channel
is moved to a lower programme number, channels between
the previous and current position of the selected channel will
be moved one programme number up and if a channel is
moved to a upper programme number, channels between
the previous and current position of the selected channel
will be moved one programme number down.
AUTOSTORE
If you enter the AUTOSTORE menu, you can automatically
programme the received channels in your TV's programmes
with APS (Automatic programme system ).
1. After displaying the PROGRAM. menu, press the BLUE
button to enter the AUTOSTORE menu. The message "
ALL PRESTORED PROGRAMMES WILL BE ERASED "
will appears.
2. If you want to start programming, press "I," button. The
message" A.P.S. IS RUNNING PLEASE WAIT" appears
and APS automatically programmes the received channels
in your TV's programme numbers. Afrer APS is finalized,
the PROGRAM. menu appears again.
To cancel APS, press "STANDARD" button.
TV Config. (Configration) Menu
This menu is used to select the Menu language, the Country
where you are now located and to select the source of AV-2
Output (SCART 2).
• In the Installation menu, Press "P A" or "P v" button to se-
lect TV Config. Then press "4" or "I_" button to enter the "IV
Config. menu.
Selecting Menu Language
• In the "TV Config." menu select Language and change
the language to the one you desire, using "4" or "!," button.
As soon as you change the language, the menu items will
be displayed in the selected language.
Selecting Country
• In the "TV Config." menu select "Country" using "P A" or
"P v" button. Change the country pressing "4" or "I_" button.
Setting External Source Output
• You can use this menu to select the internal or external
source that will be output at AV-2 (SCART 2) terminal.
• In the "'IV Config." menu select "AV-2 Output" using "P A"
or "P v" button. Then select the source you want to be out-
put at AV-2 (SCART 2) pressing "4" or "Ip" button (one of the
sources: TV, AV-1 (SCART 1) or AV-3 (Front AV).
i i i i!!ii ili!i!ii iiii !! i!i!! !!ii ii i iiii!i ! !il ¸iii!Fi!ii !ii !ii i
Sound Mute
To cut off the sound of the TV press "_" button. The sound
will be cut off. To cancel mute, press "_" or "/1" or "'_" but-
ton. The volume level will be the same as the level before
mute if you cancel mute pressing "_" button again.
ENGLISH - 8-