Assembly - Amcor NanoMax series Owner's Manual

Stretchendof
the hoseslightly,
AttachWindow
SlideBar
Connectorto
Exhaust H oseby
twistingasshown,
Put spiral water
pipe into hot air
flexible hose.
3
Connect the
female half of the
quick connector
at the end of the
spiral water pipe
to the male part
in the hot air
outlet pipe°
Turn the
connector
90 ° clockwise
until it is locked
in place
Stretch end of
the hose slightly.
Assemble the hot
air hose on the
unit by screwing
in clockwise.
Clip on the
water atomizer
at the end of
the spiral pipe
to the holder,
Unfold flexible
hose with attached
hose adapter
connector, and
snap into
Window Slide Bar,
Only
Required For
Disassembly.
In order to
unlock the quick
connector, push
the tab and turn
the connector
counter
clockwise°