Amcor NanoMax Setup Instructions

1. Locate Parts
A. Remote Control
D. Adjustable Slide Bar
2. Assemble AutoDrain NanoMist™ Technology
1
3
Before you enjoy your
NanoMax™ Portable Air Conditioner with
Innovative AutoDrain NanoMist Technology
it's important to read these easy set-up instructions.
For more information, please see the enclosed Owner's
Manual, call 1-866-361-2233, or visit
www.amcorgroupusa.com
B. Exhaust Hose
E. Insulation Strip
Attach Window
Slide Bar
Connector to
Exhaust Hose by
twisting as shown.
Connect the
female half of the
quick connector
at the end of the
spiral water pipe
to the male part
in the hot air
outlet pipe.
™
C. Slide Bar Connector
F. Drain Hose
2
4
Continued on Reverse Side
IMPORTANT:
Leave the

Air Conditioner

in an upright position
for at least two hours
before turning on!
G. Spiral
water pipe
with connector
Put spiral water
pipe into hot air
flexible hose.
Turn the
connector
90 degrees
clockwise until it
is locked in
place.