Electrolux E36WC45FSS Use & Care Manual page 17

i!iiii!iii
Installation
Non-DuctedHoodsOnly
ii
1 Remove the tape on the electrical system plate; place the electrical system plate
on the hood (use a protection). Figure 12 ....
2 Discard discharge collar/damper supplied with the hood. Install the 5 to 6 adapter
supplied with the Non-Uucted Recircutation Kit.
3 Secure the plenum to the flue mounting bracket with (2)3.9x6mm flat head
screws (the screws are supplied with the Non-Ducted Recircutation Kit Model
DFKTWC40EC). Figure 13.
5-=6-
ELECTRICAL
_ADAPTER
SYSTEM
PLATE
PROTECTION
Figure 12
3.gx6mm
FLAT HEAD
PLENUM
FLUE MOUNTING
BRACKET
Figure 13