ongratulations on your purchase of Excalibur Electronics’ Beverage Buggy. You and your friends will enjoy hours of fun driving your Beverage Buggy. Your Beverage Buggy is easy to use but be sure to use it safely. Before starting, please read this manual thoroughly, especially noting safety, care and battery information.
Includes... right, as shown in Figures 1 LEFT JOYSTICK : Push up to and 2. TRANSMITTER drive the vehicle forward. TRIM SWITCH CONTROL Push down to drive the The trim switch is located vehicle in reverse, as shown on the underside of your in Figures 1 and 2.
How to Play To begin, insert the allow you to drive it for- antenna wire through the ward, reverse, left and right. hollow tube. Avoid pulling Use both joysticks to the wire too tight. The wire turn. If you want to turn is on the top of your right while driving forward, Beverage Buggy.
To install batteries in the transmitter, please follow these steps: 1. Remove the battery cover located on the back. 2. Install one 9-volt battery making sure to match the polarity (+ and -) with the diagram inside the battery compartment. 3.
• To protect your Beverage Buggy’s wheel mechanism from lint, thread, hair and dust particles, you can use a small brush, tweezers or tie a small bit of cloth to the tip of a toothpick, etc., and wipe it off. •...
Page 7
XCALIBUR LECTRONICS 13755 SW 119 VENUE 33186 U.S.A. IAMI LORIDA : 305.477.8080 HONE : 305.477.9516 Play games www.ExcaliburElectronics.com 0641S (MA) Beverage Buggy 022607 V5 live at:...
Need help?
Do you have a question about the Beverage Buggy 641S and is the answer not in the manual?
Questions and answers