Seat Adjustment Lever; Fuses; Tracking Knob - Husqvarna RZ5424 Operator's Manual

CONTROLS
Seat Adjustment Lever
The seat can be adjusted lengthways. When making
adjustments, the lever under the right side of the
seat is pulled up, after which the seat can be moved
backward or forward.
IMPORTANT INFORMATION
Seat should not be adjusted while unit is in
motion.
Lengthways adjustment
8058-023
Fuses
Fuses are located on the left hand side of the
machine. They are accessed by tilting the seat
forward. They are flat pin fuses of the same type used
in automobiles.
There are two fuses with ratings and functions:
20 Amp Primary fuse
7.5 Amp Mower deck coupling
Fuses
8011-420
Tracking Knob
If the mower is not tracking straight, check the
air pressure in both rear tires. Recommended air
pressure is 15 psi (103 kPa / 1 bar) for all tires.
Tracking must be checked on a flat and level concrete
or blacktop surface.
Rotating the tracking knob allows fine tuning
adjustments so the machine tracks straight with the
steering control levers in the full forward position.
Rotate the knob counter clockwise (as viewed from
the operation position) to increase the speed on the
left lever. Rotate clockwise to decrease speed.
Tracking knob
8058-187
21