Honeywell T8775C The Digital Round Owner's Manual page 6

The digitalround non-programmable thermostats

Hide thumbs Also See for T8775C The Digital Round:

In heating, make sure the temperature

setting is above the

room temperature

and the flame _ is present in the display.

In cooling, make sure the temperature

setting is below the

room temperature

and a solid snowflake _,_ is present in the

display (T8775C only).

NOTE:

If a call for cooling is made before the compressor

has

been off for five minutes, or if a power interruption

occurs while the compressor

is running, the thermostat

will go into a five-minute delay to protect the compres-

sor. The snowflake _,_ will flash during this delay.

Check the system fuse or circuit breaker and replace or reset if

necessary.

Check for air movement at the register.

If you have questions concerning this thermostat, call Honeywell

Customer Care at 1-800-468-1502.

69-1679ES--1

Table of Contents

T8775a the digital round