Table of Contents
Advertisement
SERVICING
YOUR LAWN MOWER
THROTTLE
CABLE
INSPECTION
Throttle
cable adjustment
is necessary
if the throttle
lever does not
operate
the choke properly.
Perform
the inspection
and adjustment
with the engine stopped.
You can inspect choke operation
by observing
the movement
of the
choke arm, which is located on top of the carburetor.
1.
Move the throttle
lever to the
FAST position.
2.
Remove
the air cleaner
cover
(page 38).
FAST
THROTTLE
LEVER
F
,
,
Use a feeler gauge and
measure
the clearance
between
the control choke arm and the
control lever. The clearance
should be 0 ~ 0.040 in
(0 ~ 1 mm).
To adjust the clearance,
loosen
the lock nuts with a 10 mm
wrench.
Move the adjuster
up or
down as required
to obtain the
proper clearance.
Tighten
the
lock nuts.
CONTROL
CHOKE ARM
0 ~ 0.040 i n__
_ _
(0 ~ 1 mm)
_!
7
CONTROL
LEVER
LOCK
ADJUSTER
45
Advertisement
Table of Contents
