Table of Contents
Advertisement
Fig. 9 Switch
Fig. 10 Ice Cube
9. Operating
the Ice Maker
Initial Operation
1
Open the water supply valve connected with the ice maker.
2)
Insert the ice maker plug into the electrical outlet.
3) Open the door and turn the switch at the lower end of the
product to the "ICE" position."
4) Discard the first batch of ice.
5) Good-quality ice is produced 1-2 hours later.
Using the Ice Maker
Use of the ice maker is very simple. Water is supplied to the ice
maker and the water is also drained.
Simply turn the switch at the
lower end of the product to the "ICE" position. The product
automatically starts ice production, which continues until the ice
container has been filled with ice. The produced ice drops down into
the ice container.
Remove the ice using the ice scoop found on the
inside left wall of the ice maker.
The ice maker produces 24 pieces of ice every 30 minutes.
Important Information!
Do not put anything other than ice into the
ice container. Wine or beer bottles are unsanitary and a detached
label may block the drain pipe.
16
Advertisement
Table of Contents
