Maintaining The Ice Maker - Aficionado C883 User Manual

Cleaning the Ice-Production System
1) Open the door and turn off the switch at the lower right front.
2) Remove all the ice and dispose of it or store it in a freezer.
3) Pour 4 ounces of a washing agent (liquid dishwashing detergent) into the water container of the ice maker.
4) Turn the switch to the "WASH" position. The process of automatic wash (2 minutes) and water circulation
(4 minutes) will be repeated three times.
5) It may be necessary to repeat the above process 2-3 times (without adding additional detergent) to
thoroughly rinse the system.
6)
Clean the ice container, ice curtain, slide grill, spray nozzle, nozzle frame, connective hose, ice scoop, and
the inside of the water container using a mixture of washing agent and water. Wipe dry. Regularly wash the
ice scoop. It may be washed together with other food containers. Just place it into the dishwasher and use
the sanitizing cycle.
7) Replace the ice removed in Step 2.
[ WARNING l
The use ofa washing agent may cause burns. Intheevent that a persondrinks thewashing agent, do not
allow that persontovomit.Have thepersondrink a large quantity o fwateror milk. Visit a physician atonce. If
theskinisstained witha washing agent, wash it outthoroughly. Keep thewashing agentoutofthereachof
children.
11. Maintaining the Ice Maker
Shut Down Procedure for Storage in an Unheated Home.
1) Clean the ice-production system following the instructions detailed above.
2) Turn off the power.
3) Empty the water container. Remove the pump hose. The pump hose may be removed after removing the
back panel of the ice maker.
4) Separate the inlet pipe connected with the water supply valve.
5) Turn on the power and turn the switch to the "WASH" position to open the water supply valve and to
remove the water from the inlet pipe inside the ice maker.
6) In the case of the drain pump model, pour 1/2 gallon of RV anti-freeze mixture (propylene glycol) into the
ice container.
Important Information! Do not use an anti-freeze product intended for automobiles.
7) Turn off the ice maker and remove the plug from the electrical outlet.
When using the ice maker after an extended absence, re-connect the pump hose and other hoses. Repeat the
initial starting steps described on page 16.
19