FujiFilm FINEPIX Z70 series Owner's Manual page 126

Hide thumbs Also See for FINEPIX Z70 series:
Table of Contents

Advertisement

No_es _s'ndO_u ion_
• Do not use batteries that are
leaking, deformed,
discolored
• Do not store batteries
in warm or
humid places
• Keep the batteries out of reach of
babies and small children
• Make sure that the battery polarity
(@ and -@) is correct.
• Do not use new with used
batteries,
Do not use charged and
discharged
batteries
together
• Do not use different
types or
brands of batteries
at the same
time
• If you do not intend
to use the
camera for a long period of time,
remove
the batteries
from the
camera
Note if the camera is left
with the batteries
removed, the
time and date settings are cleared
• The batteries fuel warm right after
being used Before removing
the
batteries, turn the camera off
and wait for the batteries to cool
down
• Since batteries
do not work wall in
cold weather or locations, warm
the batteries by placing them
inside your garments
before use
Batteries do not work well when
cold They will work again when
the temperature
returns to normal
• Soil (such as fingerprints)
on
the battery terminals
makes the
batteries charge less reducing
the
number
of images
Carefully wipe
the battery terminals
with a soft
dry cloth
before loading
116
If any liquid
at all leaks from
z_the
batteries,
wipe the battery
compartment
thoroughly
and
then load new batteries
If any battery fluid comes
into contact with your hands
or clothing,
flush the area
thoroughly
with water
Note
z_
i_s_ battery fluid .........
of eyesig ht if it gets into
your eyes If this occurs, do
not rub your eyes Flush the
fluid out with clean water and
contact your physician for
treatment
Usingthe AA-sizeNi-MH batteries
correctly
• Ni MH batteries
left unused in
storage for long periods
can
become "deactivated"
Also,
repeatedly
charging
Ni MH
batteries that are only partially
discharged
can cause them
to suffer from the "memory
effect"
Ni MH batteries
that
are "deactivated"
or affected
by
"memory"
suffer from the problem
of only providing
power for a
short time after being charged
To
prevent this problem,
discharge
and recharge
them several times
using the camera's "Discharging
rechargeable
batteries" function
Deactivation
and memory
are
specific to Ni MH batteries
and are
not in fact battery faults
See OWNER'S MANUAL for the
procedure
for "Discharging
rechargeable
batteries"
@CAUTION
Do not use the "Discharging
rechargeable
batteries" function
when alkaline batteries
being used
• To charge Ni MH batteries,
use the quick battery
charger
(sold separately)
Refer to the
instructions
supplied
with the
charger to make sure that the
charger is used correctly
• Do not use the battery
charger to
charge other batteries,
• Note that the batteries
feel warm
after being charged
• Due to the way the camera
is
constructed,
a small amount
of
current
is used even when the
camera
is turned offl Note in
particular
that leaving Ni MH
batteries in the camera for a long
period will overdischarge
the
batteries and may render them
unusable even after recharging
• Ni MH batteries
will selfidischarge
even when not used, and the time
for which they can be used may
be shortened
as a result
• Ni MH batteries
will deteriorate
rapidly if overdischarged
(eg
by discharging
the batteries
in a
flashlight)
Use the "Discharging
rechargeable
batteries" function
provided
in the camera to
discharge
the batteries
• Ni MH batteries
have a limited
service lif_ If a battery can only be
used for a short time even after
repeated
discharge
charge cycles,
it may have reached the end of its
service life
Disposingof Batteries
• When disposing
of batteries, do
so in accordance
with your local
waste disposal
regulations
• ACPower Adapter
Always use the AC Power Adapter
with the camera
The use of an AC
Power adapter other than FUJIFILM
AC Power Adapter
can be damaged
to your digital camera
For details on the A( power adapter,
refer to the OWNER'S MANUAL of
your camera
• Use the AC power adapter for
indoor use only
• Plug the connection
cord plug
securely into the DC input
terminal
• Turn off the FUJIFILM Digital
camera
before disconnecting
the
cord from the DC input terminal
To disconnect,
pull out the plug
gently,
Do not pull on the cord
• Do not use the AC power
adapter
with any device other than your
camera
• During
use, the AC power
adapter
will become hot to the touch
This
is normal

Advertisement

Table of Contents
loading

Table of Contents