Hitachi 32TX78B Operating Manual page 36

USING THE REMOTE TO CONTROL CABLE/SATELLITE
BOX FUNCTIONS
Operating the pre-coded function for your cable/satellite box.
This remote is designed to operate different types of cable boxes and Digital Satellite Systems. You must first program
the remote to match the remote system in your cable/satellite box. (Refer to page 37.)
1. Turn on your cable/satellite box.
2. Aim the remote control at the front of your cable/satellite box.
3. Press the CABLE button to switch to cable/satellite box mode.
4. While holding down the CABLE button, enter the 2 digit preset code that matches your cable/satellite box as
shown on page 37. The remote will turn off your cable/satellite box when the correct 2 digit preset code is entered.
When this occurs, the remote control is programmed for your cable/satellite box. If the cable/satellite box does
not turn off after 5 seconds, try another 2 digit preset code.
5. The remote will now control your cable/satellite box.
NOTES:
1. If your cable/satellite box cannot be operated after performing the above procedures, this means that your
cable/satellite box code has not been precoded into the remote.
2. In the unlikely event that your cable/satellite box cannot be operated after performing the above procedures,
please consult your cable/satellite box operating guide.
3. The remote control will rememberthe codesyou haveprogrammed in untilthe batteries are removedfrom the
remotecontrol. After replacingthe batteries,repeatthe entireprogramming procedurestatedabove.
4. If your cable/satellite box does not have a power function, the remote will issue the CHANNEL UP function.
(_ CABLE Button
This button allows the remote to control your cable/satellite box by setting it to CABLE/SATELLITE mode.
(_ PRECODED CABLE/SATELLITE BOX Buttons
These buttons transmit the chosen precoded CATV and satellite codes.
(_ TVNCR Button
When the remote is in CABLE/SATELLITE mode, this is the NB button.
_ LST-CH Button
If your cable/satellite box has an enter function, this button will sendthe cable/satellite box enter code.
(_ CS/EXIT/RECALL Button
if your cable/satellite box does not have a last channelfunction, this buttonwillsend the TV channel recall code.
(_) EXCLUSIVE TV Buttons
These buttons are for operatingtheTV.
36