To The Video Signal Terminals; To The Rgb Signal Terminal - Hitachi CP-X970W User Manual

Connection to the video signal terminals
1. Input signals
Brightness signal
Color signal
S-VIDEO signal
VIDEO signal
Audio signal
Input
Output
2. Signal input jacks
1.0V p-p, 75 £2terminator
0.286V p-p (burst signal), 75 £2 terminator
1.0V p-p, 75 £2terminator
200mV rms, 20k £2or less (max. 3.0V p-p)
0-200mVrms, 1k
Color signal
Brightness signal
Ground Ground
S-VIDEO input (mini DIN 4-pin)
_Caution_
The priority sequence of the video input jacks is as follows.
(1) S-VIDEO input jack (2) RCA jack input jack
When video signals are being projected, the audio input by the video is output to the audio
output jack (RGB/V1DEO).
Connection to the RGB signal terminal
1. Input signals
Video signal
Horizontal sync signal
Vertical sync signal
Compound sync signal
Input
Audio signal
Output
2. Signal input jacks
1 Video input (red)
2 Video input (green)
3 Video input (blue)
4 N.C
5 N.C
6 Ground (red)
7 Ground (green)
8 Ground (blue)
Analog, 0.7V p-p, 75 £2terminator (positive polarity)
TTL level (positive/negative polarity)
TTL level (positive/negative polarity)
TTL level
200mV rms, 20k £2or less (max. 3.0V p-p)
O~200mVrms, 1k £2
9 N.C
10 Ground
11 N.C
12 DDC jack (Display Data Channel)
13 Horizontal sync signal/compound sync signal
14 Vertical sync signal
15 DDC jack (Display Data Channel)
5 1
,0(OoOoOoO o&
15 11
D-sub 15-pin
shrink jack
22